KOREAN  |  ENGLISH
       
> Home Appliances
VC Series
DY Series
DY-1000
DY-1010
> Universal Motor
> DC Motor
 
HOME > Products > Home Appliances > DY Series
DY Series
 
 
1. Check if the power plug is in. When the power plug is in, do not change the blade at all.
 
2. Put a material into the cup (container).
For grinding grains or dry materials: 100㏄ and less
For making fibroid juice with vegetables and fruits: 200㏄ and less

Tightly close the cup with materials with the cup base (the blade part).
Otherwise, water can leak so please pay attention to it.
 
3. Couple the main body with the connecting hook for the mixer. Insert the mixer into the main body, making the coupling part on the side of the connecting hook of the mixer consistent with the coupling part on the top of the main body, and then, turn the connecting groove of the mixer in the direction of close. Put the container which is coupled with the cup base containing materials into the connecting groove of the mixer, slightly press, and turn right to completely couple.
 
4. Plug in and press the power switch on the main body, and it will start to operate.
However, when it works, hold the main body, which will help you safely use the product.
 
5. After materials are grinded completely, switch off. After it completely stops, hold the connecting groove of the mixer, turn the cup to the left to separate it from the cup base.
 
* Check
1) Press the switch, and it will work. Hand off, and it will stop.
2) After finishing the use, wash the cup and the cup base (the blade part) cleanly) and wipe them out with a soft cloth. Especially, for the bottom of the cup base, wipe out with a dry cloth and dry in the shade. And then, you can use the clean product all the time.
3) The blade is sharp so please wipe it out with attention.
 
 
 
740, Daecheon-dong, Dalseo-gu, Daegu E-mail : vitacook@vitacook.com
Home Appliance Business Division : +82-53-584-9050
Motor Business Division : +82-53-584-9051 FAX : +82-53-584-9054
COPYRIGHT(C)2008 DONG YOUNG. ALL RIGHT RESERVED.