| HOME > Products
> Home Appliances > VC Series |
 |
VC Series |
|
|
 |
|
|
| |
|
 |
| |
 |
Prepare materials. |
|
| |
(Caution)
Prepare the proper
quantity of materials for one-time use
in a container. |
|
| |
|
Correctly mount a
necessary blade on the pivot. |
|
| |
(Caution)
Be sure to plug
out and then, mount the blade. Insert
the groove of the blade into the pin
on the pivot. |
|
| |
|
Plug in. |
|
| |
Do not use several
products for an outlet.
(Caution) The
power supply should be 220V. |
|
| |
|
Grabbing the main
body, operate the one-touch switch by
use of the second and the middle finger |
|
| |
At this time,
press the high speed or the low speed
button. While using, move the main body
up and down. |
|
| |
|
Hand off the one-touch
switch and cleanse. |
|
| |
|
How to wash |
|
| |
- Soak the blade
and the protective part in water and
rotate for 10~20 seconds, and the food
remnants will be washed out. After oily
food is cooked, drop a detergent into
warm water, rotate, and wash with clean
water.
- After the main body is cleansed,
wash out the remaining food on the bar
with running water and wipe it out with
a dry cloth. |
|
| |
|
Put it on the supporter,
and the door will automatically closed. |
|
| |
(Caution)
Do not forcibly
open or close the door of the supporter.
It becomes a cause for damage. |
|
| |
|
Correctly hold the
power cable, plug out, and then, keep. |
|
| |
| * Point |
1. The functions
are not complicated so it is convenient to
use.
2. It is possible to freely control the speed
of the motor – low or high - through the speed
control lever. |
| |
| * Check |
Tip to prevent
food from splashing
-> Input the product more than the length
of the protective part and work in materials
only. Then, no food splashes.
-> For easy mincing, lower the speed and
use it at low speed. Add materials little
by little rather than mince a large quantity
at a time, and grind as if you pound grain
in a mortar, which will help you grind more
easily. |
| |
 |
| |
 |
|
How to
change the blade |
|
| |
1. Be
sure to plug out and then,
correctly mount the mixer
blade on the pivot.
2. Insert the blade groove
of the hand mixer into the
pin of the pivot.
3. The use of the blade
remover (based on the principle
of a lever) will make it
easy for you to change the
blade. |
|
|
|
| |
|
 |
|
Usage
of blade |
|
| |
>
Crushing blade (multi-purpose
blade)
It cuts and crushes all
the materials.
It
can grind materials in any
kind of container or a hot
pot. |
|
|
|
| |
| |
1) Put fruits or vegetables
in a container, add water, yogurt or
milk a little, and grind.
2) After grinding for a while, add beverage,
and then, grind softly (it rotates faster,
along the flow of water, and makes juice)
3) Input proper concentration of water,
add honey, sugar, yogurt, or dry gin,
and slightly grind. Put ices into it
and drink (it becomes great fruit juice,
cocktail, or vegetable juice.)
4) Caution: Put food into the container
to use, switch off, slowly insert the
stainless protective part into the container,
switch on, and lift up or lower down
the body little by little. (If you put
the stainless protective part into a
container or take it out when it is
on, food can splash or a part of your
body can be injured so be sure to switch
the protective part off to input or
take it out. |
|
| |
|
Bubble blade |
|
| |
It mixes, stirs, and
makes bubbles, letting the air flow
in. For example.
1) Making bubbles with the white of
an egg: Massage cream, Ice cream
2) Making coffee bubbles: Cappuccino
coffee (Diet coffee)
3) Making fresh cream
4) Mixing powder of roast grain
5) (Caution)
It is normal that it is a little twisted
so do not fold it straight. |
|
| |
* Point
1) Bubble blade repeatedly
moves up and down and mixes materials with
air.
2) You had better use a crushing blade if
you don’t want to make bubbles. |
| |
 |
