| Trouble |
Corrective
Actions |
| When the product
doesn't work |
Check if the plug is correctly
in. |
| When the product
is heated a lot |
The heat results
from long-term use so stop it
and 1 hour later,
re-operate it. |
When
the rotation is too slow so
materials are not grinded well |
The quantity
of a material is too much so do
not input more than
the proper quantity. |
| When
the blade doesn’t rotate |
Check if the
blade is correctly mounted in
the blade groove and
if there is any material between
blades |
| When the pivot doesn’t
rotate, making the noise of buzz |
Promptly switch
off. This trouble results from
the negligence in washing or from
no use for a long time. That is,
food remnants,
which are hardened, prevent the
blade from rotating. Plug out,
put
the blade and the protective part
in hot water for 10 minutes, and
then, operate it. |
| When there is serious
vibration or noise |
Check if the
protective part and the connecting
hook for the hand
mixer are correctly coupled |
| When the blade is
naturally missing |
Check if the
groove of the blade (crushing
blade, bubble blade) is
correctly inserted into the pin
on the pivot. This trouble results
from the loosened spring on the
opposite of the blade (crushing,
bubble) groove so slightly tighten
the spring with a pair of pincers. |
